Cisco Systems 78-11741-02 manual PGM Host and Router Assist Configuration Examples, IPC-500

Configuring PGM Host and Router Assist

PGM Host and Router Assist Configuration Examples

To enable PGM Host debugging, use the following command in privileged EXEC mode:

Command	Purpose
Router# debug ip pgm host	Displays debug messages for PGM Host.
To display PGM Host information, use the following commands in user EXEC mode, as needed:
Command	Purpose
Router> show ip pgm host defaults	Displays the default values for PGM Host traffic.
Router> show ip pgm host sessions [session-number	Displays open PGM Host traffic sessions.
group-address]
Router> show ip pgm host traffic	Displays PGM Host traffic statistics.

Monitoring and Maintaining PGM Router Assist

To clear PGM traffic statistics, use the following command in privileged EXEC mode:

Command	Purpose
Router# clear ip pgm router [[traffic [type	Clears the PGM traffic statistics. Use the rtx-statekeyword to
number]] [rtx-state[group-address]]]	clear PGM retransmit state.

To display PGM information, use the following command in privileged EXEC mode:

Command	Purpose
Router# show ip pgm router [[interface [type	Displays information about PGM traffic statistics and TSI state.
number]] [state [group-address]] [traffic [type	The TSI is the transport-layer identifier for the source of a PGM
number]]] [verbose]	session. Confirms that PGM Router Assist is configured,
	although there might not be any active traffic. Use the state or
	traffic keywords to learn whether an interface is actively using
	PGM.

PGM Host and Router Assist Configuration Examples

Note Support for the PGM Host feature has been removed. Use of this feature is not recommended.

This section provides the following configuration examples:

•PGM Host with a Virtual Interface Example

•PGM Host with a Physical Interface Example

•PGM Router Assist with a Virtual Interface Example

•PGM Router Assist with a Physical Interface Example

Cisco IOS IP Configuration Guide

IPC-500