Cisco Systems 78-11741-02 Multiprotocol BGP Peer Examples, Multiprotocol BGP Peer Group Examples

Configuring Multiprotocol BGP Extensions for IP Multicast

Multiprotocol BGP Configuration Task List

•Multiprotocol BGP Peer Examples

•Multiprotocol BGP Peer Group Examples

•Multiprotocol BGP Network Advertisement Examples

•Multiprotocol BGP Route Map Examples

•Multiprotocol BGP Route Redistribute Examples

•Multiprotocol BGP Route Reflector Examples

•Aggregate Multiprotocol BGP Address Examples

Multiprotocol BGP Peer Examples

The following example shows how to use an address family to configure a neighbor as both unicast and multicast-capable:

router bgp 50000 address-family ipv4 unicast

neighbor 10.1.1.1 activate

router bgp 50000 address-family ipv4 multicast

neighbor 10.1.1.1 activate

Multiprotocol BGP Peer Group Examples

The following example shows how to use an address family to configure a peer group so that all members of the peer group are both unicast and multicast-capable:

router bgp 50000

neighbor 10.1.1.1 remote-as 1 neighbor 12.2.2.2 remote-as 1 address-family ipv4 unicast

neighbor mygroup peer-group

neighbor 10.1.1.1 peer-group mygroup neighbor 12.2.2.2 peer-group mygroup

router bgp 50000

neighbor 10.1.1.1 remote-as 1 neighbor 12.2.2.2 remote-as 1 address-family ipv4 multicast neighbor mygroup peer-group

neighbor 10.1.1.1 peer-group mygroup neighbor 12.2.2.2 peer-group mygroup

Note The neighbor activate command is not required in this configuration because peer groups are activated automatically as peer group configuration parameters are applied.

Cisco IOS IP Configuration Guide

IPC-359