Cisco Systems 78-11741-02 manual Enabling the Real Server for Service, Specifying a Virtual Server

Configuring Server Load Balancing

IOS SLB Configuration Task List

Enabling the Real Server for Service

To place the real server into service, use the following command in SLB real server configuration mode:

Command	Purpose
Router(config-slb-real)# inservice	Enables the real server for use by IOS SLB.

Specifying a Virtual Server

To specify a virtual server, use the following command in global configuration mode:

Command	Purpose
Router(config)# ip slb vserver virtserver-name	Identifies a virtual server and enters SLB virtual
	server configuration mode.

Associating a Virtual Server with a Server Farm

To associate the virtual server with a server farm, use the following command in SLB virtual server configuration mode:

Command	Purpose
Router(config-slb-vserver)# serverfarm serverfarm-name	Associates a real server farm with a virtual server.

Configuring Virtual Server Attributes

To configure virtual server attributes, use the following command in SLB virtual server configuration mode:

Command	Purpose
Router(config-slb-vserver)# virtual ip-address{tcp udp}	Specifies the virtual server IP address, type of
port-number [service service-name]	connection, port number, and optional service
	coupling.

Cisco IOS IP Configuration Guide

IPC-143