Cisco Systems 7925G manual Using cBarge, Using Meet-Me, Choose Options cBarge, MeetMe

Using cBarge

You can create a conference by using cBarge to add yourself to a call on a shared line.

If you want to...	Then...
Create a conference by	1.	Press	to select a call on a shared line.
barging a call on a shared line	2.	Choose Options > cBarge.
	See Using a Shared Line, page 57.
See a list of conference	Choose Options > ConfList. See Viewing or Removing Conference
participants or remove	Participants, page 49.
participants

Using Meet-Me

Meet-Me conferencing allows you to start or join a conference by calling the conference number.

If you want to...	Then...
Start a Meet-Me conference 1. Obtain a Meet-Me phone number from your system administrator.
	2.	Distribute the number to participants.
	3.	When you are ready to start the meeting, choose Options >
		MeetMe.
	4.	Dial the Meet-Me conference number.
	5.	Press	.
		Participants can now join the conference by dialing in.

Note Participants hear a busy tone if they call the conference before the initiator has joined. In this case, participants must call back.

Join a Meet-Me conference 1. Dial the Meet-Me conference number (provided by the conference initiator).

2.Press .

Note You will hear a busy tone if you call the conference before the initiator has joined. In this case, try your call again.

End a Meet-Me conference All participants must hang up.

The conference does not automatically end when the conference initiator disconnects.

48 OL-16132-01