Cisco Systems 7925G manual Understanding Lines vs. Calls, Using Phone Buttons, For more

Using Phone Buttons

The phone keypad and buttons provide these shortcuts to frequently used functions.

							For more
If you want to...	Then...						information, see...
Lock the phone	Press and hold the			key until the screen displays			Setting the Keypad
keypad	“Keypad Locked” and the				icon displays at the top of		to Automatically
	the Main screen.						Lock, page 75
	Note The keypad lock is temporarily disabled when you have
		an incoming call.
Unlock the	Press Unlock. When the screen displays “Unlock Keypad?”,
phone keypad	press OK, and the			icon disappears.
	Note You must press the Unlock and OK softkeys when they
		appear, or the keypad remains locked.
Toggle between	Press and hold		until the screen displays				Customizing Rings,
ring and vibrate							page 70
mode	“Vibrate On!” and the			icon appears at the top.
	To switch back to the ring mode, press and hold					until
	the screen displays “Vibrate Off!” and the					icon
	disappears.
	Note You can also use the Volume button to set the vibrate
		mode.
Listen to voice	Press and hold the			until the phone connects to your			Accessing Voice
messages	voice messaging system.						Messages, page 87
Adjust the	Press	for a call on the handset, speaker, or headset.					Using Phone
volume during a							Buttons, page 28
call
Change the ring	When the phone is idle, press				to set the ring volume,		Customizing Rings,
pattern for your	vibrate, or silent mode.						page 70
calls

Understanding Lines vs. Calls

To avoid confusion about lines and calls, refer to these descriptions:

•Lines—Each corresponds to a directory number or intercom number that others can use to call

you. Your phone supports up to six lines. To see your phone lines, press	to open Line
View. You have as many lines as you have directory numbers with phone line icons		in the Line
View list.
28		OL-16132-01