Cisco Systems 7925G manual Pair, Phone Settings Bluetooth Device List

Using a Handset, Headset, and Speakerphone

If you want to...	Then...
Enable/disable Bluetooth	1.	Choose	> Phone Settings > Bluetooth.
on your phone	2.	Highlight Bluetooth and press Select.
	3.	Select Enable or Disable, then press Save.
		If enabled, the Bluetooth enabled icon		appears. If disabled, the
		icon disappears.

Note Bluetooth must be enabled on the phone before you can perform tasks such as scanning, pairing, and unpairing.

Scan for Bluetooth devices 1. Choose > Phone Settings > Bluetooth > Device List.

2.Press Scan. A list of devices appears.

Note It may take a few seconds for the scan to complete. You might need to rescan for a device. To rescan, press Rescan from Scan Results.

Pair a Bluetooth headset	1.	From the Scan Results list, select a Bluetooth headset and press
with the phone		Pair.
	2.	When prompted, enter the Bluetooth Passkey, then press
		(Select) or Options > OK.

Note Obtain the Bluetooth Passkey from your Bluetooth device documentation. Pairing must be completed within one minute or it will fail.

	3.	If the pairing succeeds, the newly paired headset is added to the
		Device List and becomes connected to the phone (if no prior
		Bluetooth connection exists between another device and the
		phone.) If a prior connection exists, first unpair or disconnect the
		other device from the phone.
		The Bluetooth device connected icon		is displayed, and a
		checkmark appears next to the device name.
	4.	If the pairing fails, press Back to retry.
Connect a Bluetooth	Do one of the following:
headset already paired (but	•	Tap on the headset to send a connection request to the phone.
not connected) with the
	•	Choose	> Phone Settings > Bluetooth > Device List,
phone
		highlight the headset, and press Options > Connect.

Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 67