Cisco Systems 7925G manual Using Mute

If you want to...	Then...
Remove a call from	See the instructions from your Bluetooth wireless headset documentation.
hold on the current line	Note If there is an active call and a held call on the line, you can end the
(using the Bluetooth		active call or place it on hold when you resume the held call.
wireless headset)
Remove a call from	1.	Press	to change to another line.
hold on a different line	2.	Press Resume.
	Note If a single call is holding on this line, the call automatically resumes. If
		another call is holding, scroll to the appropriate call and press Resume.
Move a call on a shared	1.	From the phone with the active call on the shared line, press Hold.
line to your wireless	2.	From your other phone with the shared line, press Resume.
phone or to your desk
phone

Tips

•Engaging the Hold feature typically generates music or a beeping tone.

•If you receive an alert for an incoming call and a reverting call at the same time, by default your phone will shift the focus of the phone screen to display the incoming call. Your system administrator can change this focus priority setting.

•If you use a shared line, Hold Reversion rings only on the phone that put the call on hold, not on the other phones that share the line.

•The duration between Hold Reversion alerts is determined by your system administrator.

Using Mute

With Mute enabled, you can hear other parties on a call, but they cannot hear you. You can use Mute with the phone or a headset.

If you want to...	Then...
Toggle Mute on	During a call, press		on left side of phone. The	icon appears
	at the top of the phone screen.
Toggle Mute off	Press	. The	icon disappears.

40 OL-16132-01