Cisco Systems 7931G manual Using Meet-Me

Using Meet-Me

Meet-Me conferencing allows you to start or join a conference by calling the conference number.

If you want to...	...Then
Start a Meet-Me conference	1.	Obtain a Meet-Me phone number from your system administrator.
	2.	Distribute the number to participants.
	3.	When you are ready to start the meeting, go off-hook to get a dial
		tone, then press MeetMe.
	4.	Dial the Meet-Me conference number.
		Participants can now join the conference by dialing in.
	Note Participants hear a busy tone if they call the conference before the
		initiator has joined. In this case, participants must call back.
Join a Meet-Me conference	Dial the Meet-Me conference number (provided by the
	conference initiator).
	Note You will hear a busy tone if you call the conference before the
		initiator has joined. In this case, try your call again.
End a Meet-Me conference	All participants must hang up.
	The conference does not automatically end when the conference
	initiator disconnects.

Tip

If you call a secure Meet-Me conference number from a non-secure phone, your phone displays the message, “Device Not Authorized.” For more information, see Making and Receiving Secure Calls, page 44.

34 OL-22334-01