Cisco Systems 7931G manual Using Conference

Using Conference

Conference allows you to call each participant. Conference is available on most phones.

If you want to...	Then...
Create a conference by calling	1. From a connected call, press Confrn or Conference. (You may
participants		need to press the more softkey to see Confrn.)
	2.	Enter the participant’s phone number.
	3.	Wait for the call to connect.
	4.	Press Confrn or Conference again to add the participant to your
		call.
	5.	Repeat to add additional participants.
Add new participants to an	Repeat the steps listed above.
existing conference	Your system administrator determines whether non-initiators of a
	conference can add or remove participants.
See a list of participants or	Press ConfList or Conference List. (You may need to press the more
remove participants	softkey first.) See Viewing or Removing Conference Participants,
	page 35.

Tips

•If you frequently join more than two parties into a single conference, you may find it useful to first select the calls that you want to join, then press Join to complete the action.

•When Join completes, caller ID changes to “Conference.”

•A Call Chaperone user can conference only the first caller. Subsequent callers can be conferenced by the other participants in the conference.

32 OL-22334-01