![](/images/new-backgrounds/1170309/17030989x1.webp)
Chapter 2 Switch Installation
Connecting to SFP Modules
Step 3 Reconfigure and reboot the connected device, if necessary.
Step 4 Repeat Steps 1 through 3 to connect each device.
Connecting to SFP Modules
This section describes how to connect to SFP modules. For instructions on how to connect to
For instructions about how to install or remove an SFP module, see the “Installing and Removing SFP Modules” section on page
Connecting to Fiber-Optic SFP Modules
Follow these steps to connect a
Warning Class 1 laser product. Statement 1008
Caution Do not remove the rubber plugs from the SFP module port or the rubber caps from the
Before connecting to the SFP module, be sure that you understand the port and cabling stipulations in the “Installation Guidelines” section on page
SFP module.
Step 1 Remove the rubber plugs from the module port and
Figure 2-18 Connecting to a Fiber-Optic SFP Module Port
1
Cisco |
|
|
ME |
| |
| 3400 | SERIES |
1 |
|
|
2 |
|
|
LC connector
132679
Step 3 Insert the other cable end into a
Cisco ME 3400 Ethernet Access Switch Hardware Installation Guide
|
| ||
|
|