Cisco Systems Cisco ME 3400 manual Inserting and Removing the SFP Module Patch Cable

Chapter 2 Switch Installation

Inserting and Removing the SFP Module Patch Cable

Step 5 For fiber-optic SFP modules, insert a dust plug into the optical ports of the SFP module to keep the optical interfaces clean.

Step 6 Place the removed SFP module in an antistatic bag or other protective environment.

Inserting and Removing the SFP Module Patch Cable

To insert an SFP module patch cable into the SFP module slot, follow these steps:

Step 1 Attach an ESD-preventive wrist strap to your wrist and to a bare metal surface on the chassis.

Step 2 Insert the SFP module patch cable into the slot until you feel the connector on the cable snap into place in the rear of the slot (see Figure 2-15).

Figure 2-15 Inserting an SFP Module Patch Cable into an SFP Module Slot

Cisco ME

1

2

3400

SERIES

132676

Step 3 Repeat these steps for the second Cisco ME switch to which you want to cascade the first switch. See Figure 2-16.

Figure 2-16 Connecting Two Cisco ME Switches with an SFP Module Patch Cable

SYSTEM

RATING
100-240V		~
1A-0.5A,			HZ
	50-60			CONSOLE
				SYSTEM
RATING
100-240V
1A-0.5A,		~	HZ
	50-60			CONSOLE

1	2	4
1X	3		6
		5		8
			7		10
				9		11	12
							11X
2X
							12X
1	2	4
1X	3		6
		5		8
			7		10
				9		11	12
							11X
2X
							12X

13	14
13X
14X
13	14
13X
14X

15	16	17	18
				19	20	21	22
								23	24
									23X
15	16	17	18
				19	20	21	22
								23	24
									23X
									24X

Cisco ME

1

2

Cisco ME

1

2

3400

3400

SERIES

SERIES

132677

To remove an SFP module patch cable from the SFP module slot, release the connector, and pull it from the SFP module slot.

Cisco ME 3400 Ethernet Access Switch Hardware Installation Guide

OL-7677-04 2-19