Cisco IE 3000 Switch Getting Started Guide
Installing SFP Modules and Connecting to Ports
| Follow these steps: |
Step 1 | Grasp the module on the sides, and insert it |
| into the switch slot until you feel the |
| connector snap into place. |
| 202326 |
Step 2 Insert an appropriate cable into the module port.
202327
Step 3 Insert the other cable end into the other device.
For a list of supported modules, see the release notes on Cisco.com. For detailed instructions on installing, removing, and connecting to SFP modules, see the documentation that came with the SFP module.
Caution Removing and installing an SFP module can shorten its useful life. Do not remove and insert SFP modules more often than is absolutely necessary.
|
| Cisco IE 3000 Switch Getting Started Guide |
|
|
|
|
| ||
|
|
| 23 | |
|
|
|
