Cisco Systems IE 3000 warranty 202334 203759 202335

Cisco IE 3000 Switch Getting Started Guide

Follow these steps to connect the expansion modules to the switch.

Step 1 Remove the right side panel by firmly grasping both sides in the middle and pulling it outward. If necessary, use a flat-blade screwdriver to pry open the side panel.

Step 2 Remove the EMI protective cover from the connector.

Step 3 Push the upper module latches up and the lower module latches down, and then slide the switch and module together.

Note If you are installing a Cisco IEM-3000-8TM module and a Cisco IEM-3000-8FM module, install the Cisco IEM-3000-8TM first.

202334

203759

202335

Cisco IE 3000 Switch Getting Started Guide

4 OL-16234-01