Cisco IE 3000 Switch Getting Started Guide
Step 3 Insert the ground wire into the ring terminal lug, and using a crimping tool, crimp the ring terminal to the wire.
119626
Step 4 Slide the ground screw from Step 1 through the ring terminal.
Step 5 Insert the ground screw into the
202329
Step 6 Use a ratcheting torque screwdriver to tighten the ground screw and ring terminal lug to the switch front panel to 8.5
Step 7 Attach the other end of the ground wire to a grounded bare metal surface, such as a ground bus, a grounded DIN rail, or a grounded bare rack.
Wiring the DC Power Source
Follow these steps to prepare the DC power cable.
Warning Before performing any of the following procedures, ensure that power is removed from the DC circuit. Statement 1003
| Cisco IE 3000 Switch Getting Started Guide |
18 |
