Cisco Systems IE 3000 Series, IEM30004PC Compact Flash Memory Card

1-11
Cisco IE 3000 Switch Hardware Installation Guide
OL-13017-01
Chapter 1 Overview
Compact Flash Memory Card
Dual-Purpose Port LEDs
Figure 1-9 shows the LEDs on a dual-purpose port. You can configure each port as either a 10/100/1000
port through the RJ-45 connector or as an SFP module, but not both at the same time. The LEDs show
how the port is being used (Ethernet or SFP module).
The LED colors have the same meanings as described in Table 1-6.
Figure 1-9 Dual-Purpose Port LEDs
Compact Flash Memory Card
The switch supports a compact flash memory card that makes it possible to replace a failed switch
without reconfiguring the new switch. The slot for the compact flash memory card is on the bottom of
the switch. See Figure 1-10.
Note For more information on inserting and removing the compact flash memory ca rd, see the “Installing or
Removing the Compact Flash Memory Card” section on page 2-10.
1RJ-45 connector 3SFP module port in-use LED
2RJ-45 port in-use LED 4SFP module slot
1
41 2 3
203660