2-18
Cisco IE 3000 Switch Hardware Installation Guide
OL-13017-01
Chapter 2 Switch Installation
Verifying Switch Operation
Figure 2-14 Inserting Wires in the Power and Relay Connector
Step 6 Use a ratcheting torque flathead screwdriver to torque the power and relay connector captive screws
(above the installed wire leads) to 2 in-lb. See Figure 2-15.
Caution Do not over-torque the power and relay connector captive screws. The torque shoul d not exceed 2 in-lb.
1Power source positive connection 2Power source return connection
202028
RT A
VA
1
2