Manuals / Cisco Systems / Computer Equipment / Switch

Cisco Systems IE 3000 Series, IEM30004PC manual Running Post

Models: IE 3000 Series IEM30004PC

1 170
Download 170 pages 5.73 Kb
Page 115
Image 115

Appendix B Installation In a Hazardous Environment

Verifying Switch Operation

Running POST

When the switch powers on, it automatically initiates a POST. The POST runs a series of tests that verify that the switch functions properly and ensures that it is ready to install. To test the switch, follow these steps:

•Power On the Switch, page B-25

•Verify POST Results, page B-25

•Disconnect Power, page B-25

Power On the Switch

To apply power to a switch that is directly connected to a DC power source, locate the circuit breaker on the panel board that services the DC circuit, and switch the circuit breaker to the ON position.

Note For instructions on how to apply power to a switch that is connected to a power converter, see the “Applying Power to the Power Converter” section on page B-59.

Verify POST Results

When you power on the switch, it automatically begins a POST. All LEDs are off for a few seconds, and then each LED is tested. One at a time, the System, Alarm, Setup, Pwr A, and Pwr B LEDs each briefly turns green, then red, and then go off. The System LED blinks green as the boot loader verifies the basic functionality of the processing and memory hardware. Assuming all tests pass, the System LED continues to blink green as the Cisco IOS software image loads. If the POST fails, the System LED turns red.

Note POST failures are usually fatal. Call Cisco Systems immediately if your switch does not pass POST. See the “Obtaining Documentation, Obtaining Support, and Security Guidelines” section on page x.

Disconnect Power

After successfully running POST, follow these steps.

Step 1 Turn off power to the switch.

Step 2 Disconnect the cables.

Step 3 Decide where you want to install the switch.

 

 

Cisco IE 3000 Switch Hardware Installation Guide

 

 

 

 

 

 

 

OL-13017-01

 

 

B-25

 

 

 

 

 

Page 114 Page 116
Page 115
Image 115
Cisco Systems IE 3000 Series, IEM30004PC manual Running Post
Page 114 Page 116

IE 3000 Series, IEM30004PC specifications

The Cisco IEM30004PC is an integral component of the Cisco IE 3000 Series, designed specifically for deployment in harsh industrial environments. This managed Ethernet switch provides versatility, reliability, and robust performance necessary for industrial applications, supporting a range of Ethernet-enabled devices.

One of the main features of the IEM30004PC is its rugged design. The switch is built to withstand extreme temperatures, vibrations, and electromagnetic interference, making it ideal for usage in manufacturing plants, oil and gas facilities, and transportation systems. It operates within a wide temperature range of -40 to 75 degrees Celsius, ensuring dependable functionality in varying environmental conditions.

The IEM30004PC is equipped with four 10/100/1000 Gigabit Ethernet ports. These ports support both copper and fiber connections, providing flexibility for network installations. In addition, the switch supports various redundancy protocols, including Rapid Spanning Tree Protocol (RSTP) and Link Aggregation Control Protocol (LACP), which enhance network reliability and fault tolerance.

Another distinguishing characteristic of the IEM30004PC is its support for Power over Ethernet (PoE). This feature allows the switch to deliver power over the Ethernet cables to connected devices, such as IP cameras and wireless access points, eliminating the need for separate power sources and simplifying installations.

Cisco's IEM30004PC also integrates advanced security features, including 802.1X port-based authentication, Access Control Lists (ACLs), and Role-Based Access Control (RBAC). These security measures ensure that only authorized devices can connect to the network, reducing the risk of unauthorized access and enhancing overall network integrity.

For network management, the IEM30004PC supports Simple Network Management Protocol (SNMP), Cisco's Network Assistant, and other management tools. This enables centralized control and monitoring of the network, simplifying the administration and operation of industrial networks.

In summary, the Cisco IEM30004PC, as part of the IE 3000 Series, is engineered for robust performance in industrial settings. With its rugged design, multiple Gigabit Ethernet ports, PoE capabilities, and advanced security features, it is an excellent choice for organizations seeking reliable networking solutions in challenging environments. Its comprehensive management options further enhance its utility, making it an indispensable asset for modern industrial networks.