Manuals / Cisco Systems / Computer Equipment / Switch

Cisco Systems IEM30004PC Verify Switch LEDs, Verify Switch Connections, Bad or Damaged Cable

Models: IE 3000 Series IEM30004PC

1 170
Download 170 pages 5.73 Kb
Page 82
Image 82

Chapter 3 Troubleshooting

Diagnosing Problems

Warning If you connect or disconnect the console cable with power applied to the switch or any device on the network, an electrical arc can occur. This could cause an explosion in hazardous location installations. Be sure that power is removed or the area is nonhazardous before proceeding.

To verify switch operation, perform POST on the switch in a nonhazardous location before installation. Statement 1065

Verify Switch LEDs

If you have physical access to the switch, look at the port LEDs for information about the switch. See the “LEDs” section on page 1-6for a description of the LED colors and their meanings.

Verify Switch Connections

Review this section when troubleshooting switch connection problems.

Bad or Damaged Cable

Always make sure that the cable does not have marginal damage or failure. A cable might be connect at the physical layer, but it could corrupt packets as a result of subtle damage to the wiring or connectors. If the port has many packet errors or the port constantly flaps (loses and regains link):

•Exchange the copper or fiber-optic cable with a known, good cable.

•Look for broken, bent, or missing pins on cable connectors.

•Rule out any bad patch panel connections or media convertors between the source and destination. If possible, bypass the patch panel, or eliminate faulty media convertors (fiber-optic-to-copper).

•Try the cable in another port or interface, if possible, to see if the problem follows the cable.

Ethernet and Fiber Cables

Make sure that you have the correct cable type for the connection:

•Ethernet, use Category 3 copper cable for 10 Mb/s UTP connections

Use either Category 5, Category 5e, or Category 6 UTP for 10/100 or 10/100/1000 Mb/s connections.

•Fiber-optic connectors

Verify that you have the correct cable for the distance and the port type. Make sure that the connected device ports both match and use the same type encoding, optical frequency, and fiber type. For more information about cabling, see the “Cable and Adapter Specifications” section on page C-4.

•Copper connections

Determine if a crossover cable was used when a straight-through was required or the reverse. Enable auto-MDIX on the switch, or replace the cable. See the “Cable and Adapter Specifications” section on page C-4for recommended Ethernet cables.

Cisco IE 3000 Switch Hardware Installation Guide

3-2

OL-13017-01

 

 

Page 81 Page 83
Page 82
Image 82
Cisco Systems IEM30004PC Verify Switch LEDs, Verify Switch Connections, Bad or Damaged Cable, Ethernet and Fiber Cables
Page 81 Page 83

IE 3000 Series, IEM30004PC specifications

The Cisco IEM30004PC is an integral component of the Cisco IE 3000 Series, designed specifically for deployment in harsh industrial environments. This managed Ethernet switch provides versatility, reliability, and robust performance necessary for industrial applications, supporting a range of Ethernet-enabled devices.

One of the main features of the IEM30004PC is its rugged design. The switch is built to withstand extreme temperatures, vibrations, and electromagnetic interference, making it ideal for usage in manufacturing plants, oil and gas facilities, and transportation systems. It operates within a wide temperature range of -40 to 75 degrees Celsius, ensuring dependable functionality in varying environmental conditions.

The IEM30004PC is equipped with four 10/100/1000 Gigabit Ethernet ports. These ports support both copper and fiber connections, providing flexibility for network installations. In addition, the switch supports various redundancy protocols, including Rapid Spanning Tree Protocol (RSTP) and Link Aggregation Control Protocol (LACP), which enhance network reliability and fault tolerance.

Another distinguishing characteristic of the IEM30004PC is its support for Power over Ethernet (PoE). This feature allows the switch to deliver power over the Ethernet cables to connected devices, such as IP cameras and wireless access points, eliminating the need for separate power sources and simplifying installations.

Cisco's IEM30004PC also integrates advanced security features, including 802.1X port-based authentication, Access Control Lists (ACLs), and Role-Based Access Control (RBAC). These security measures ensure that only authorized devices can connect to the network, reducing the risk of unauthorized access and enhancing overall network integrity.

For network management, the IEM30004PC supports Simple Network Management Protocol (SNMP), Cisco's Network Assistant, and other management tools. This enables centralized control and monitoring of the network, simplifying the administration and operation of industrial networks.

In summary, the Cisco IEM30004PC, as part of the IE 3000 Series, is engineered for robust performance in industrial settings. With its rugged design, multiple Gigabit Ethernet ports, PoE capabilities, and advanced security features, it is an excellent choice for organizations seeking reliable networking solutions in challenging environments. Its comprehensive management options further enhance its utility, making it an indispensable asset for modern industrial networks.