Chapter 2 Preparing to Install the Router
Inspecting the Router
•#6,
•
•
Inspecting the Router
Do not unpack the router until you are ready to install it. If the final installation site will not be ready for some time, keep the chassis in its shipping container to prevent accidental damage. When you are ready to install the router, proceed with unpacking it.
The router, cables, publications, and any optional equipment you ordered may be shipped in more than one container. When you unpack the containers, check the packing list to ensure that you received all the following items:
•Router
•
•This publication, the Regulatory Compliance and Safety Information document, optional companion publications, or Documentation
•Cisco Information Packet publication
Inspect all items for shipping damage. If anything appears to be damaged, or if you encounter problems installing or configuring your router, contact customer service. Warranty, service, and support information is in the Cisco Information Packet that shipped with your router.
Creating a Site Log
The Site Log provides a record of all actions related to the router. Keep it in an accessible place near the chassis where anyone who performs tasks has access to it. Use the Installation Checklist (a sample is included in the following section) to verify steps in the installation and maintenance of the router. Site Log entries might include the following:
•Installation
•Upgrade and maintenance
–Installation of network modules
–Removal or replacement of network modules and other upgrades
–Configuration changes
–Maintenance schedules and requirements
–Maintenance procedures performed
–Intermittent problems
–Comments and notes
Cisco MWR 1900 Mobile Wireless Edge Router Hardware Installation Guide
| ||
|
