Chapter 2 Using the NetFlow Collector User Interface
Configuration
Max Flow Byte Rate
The Max Flow Byte Rate value builder determines the byte rate for each received flow and outputs the highest value found for all flows in an aggregation period. This builder was referred to as Max Burst Rate in previous releases. It has the following attributes.
Attribute | Description |
|
|
Name | Column name in output. |
|
|
Start time field | ID of the start time field to obtain from a flow. |
|
|
End time field | ID of the end time field to obtain from a flow. |
|
|
Byte count field | ID of the byte count field to obtain from a flow. |
|
|
Usage | Always leave set as Maximum. |
|
|
Rate
The Rate value builder determines a rate by dividing the result of another value by the amount of time in the aggregation period. It has the following attributes.
Attribute
Name
Quantity value
Units
Description
Column name in output.
ID of another value builder used to determine the quantity.
Scales the result to seconds or minutes.
Start Time
The Start Time value builder obtains a start time from a field in a flow. It has the following attributes...
Attribute
Name
Start time field
Description
Column name in output.
ID of the start time field to obtain from a flow.
Sum
The Sum value builder obtains an integer value from a field in a flow and adds it to a count. It has the following attributes.
Attribute
Name
Field
Allow null value
Description
Column name in output.
ID of the integer field to obtain from a flow.
If not selected and the flow does not contain the specified field, an error is logged.
| Cisco NetFlow Collector User Guide |
