Cisco Systems OL-11399-01 manual Thresholds, Modify Aggregator Window

Chapter 2 Using the NetFlow Collector User Interface

Configuration

Figure 2-7 Modify Aggregator Window

To modify the selected aggregator, fill in the fields and click Modify to complete the operation. To remove the selected aggregator, click Remove.

Note When a key or value builder, filter, or aggregation scheme is modified through the web-based user interface, collector configuration is updated immediately. However, for the update to have an affect on aggregation and output, the aggregator must be modified or the collector must be restarted.

Thresholds

Thresholds provide a way to generate events when values in the NetFlow Collector output cross a specified target value. You configure thresholds for each aggregator. A list of thresholds for an aggregator is displayed in the Add Aggregator window.

From the Add Aggregator window, click Add Threshold to add a new threshold. Click on the appropriate link in the threshold list to modify or remove an existing Threshold.

When adding and editing thresholds the windows are identical with the exception that you cannot change the threshold ID when modifying a threshold. Use this window to add, remove, and order threshold conditions.

The threshold editor is applet-based. A tree on the left-hand side of the threshold editor shows the elements of the threshold. A form on the right-hand side of the threshold editor contains the attributes for the currently selected item in the tree.

Cisco NetFlow Collector User Guide

OL-11399-01 2-9