Cisco Systems OL-23421-02 manual Supported SFPs, Type of SFP Module, Model

Chapter 1 Product Overview

Ports

Supported SFPs

Table 1-4describes the supported SFP modules.

Note The following SFP module slot points should be noted:

-The four 100 Mb/s FE SFP module slots of the Fiber model can only support 100FX connections.

-The 100/1000 Mb/s SFP module slots support both 100FX and 1000Base-X connections.

Table 1-4	Supported SFP Models
Type of SFP Module		Model
Rugged and Industrial SFPs		•	GLC-SX-MM-RGD
-40 to 140°F (-40 to 60°C)		•	GLC-LX-SM-RGD
		• GLC-ZX-SM-RGD
		•	GLC-FE-100LX-RGD
		• GLC-FE-100FX-RGD
Commercial SFPs		•	GLC-BX-U with digital optical monitoring (DOM) support
32 to 113°F (0 to 45°C)		•	GLC-BX-D with DOM support
		•	GLC-FE-100LX
		•	GLC-FE-100BX-D
		•	GLC-FE-100BX-U
		•	GLC-FE-100FX
		•	GLC-FE-100EX
		•	GLC-FE-100ZX
		• CWDM-SFP with DOM support
Extended temperature SFPs		•	SFP-GE-S with DOM support
23 to 140°F (-5 to 60°C)		•	SFP-GE-L with DOM support
		• SFP-GE-Z with DOM support
		• GLC-EX-SMD with DOM support

Note SFP module GLC-FE-100FX-RGD requires Version 2 to operate correctly in the switch module. After installing this SFP, you may receive the following message:

PLATFORM-4-SFP_REVISION_WARNING: Interface <interface> has an obsolete SFP module that is

not recommended for this product.

This is a software warning that occurs when detecting an older version of SFP module

GLC-FE-100FX-RGD, which has been replaced with an updated version (Rev. 2).

The recommended action is to replace this SFP module with the latest Cisco certified version of this SFP. The switch module requires Rev. 2 or higher of this SFP for optimum operation over the entire operating temperature range. To check the VID for the revision number, use the show inventory command.

Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide

1-6 OL-23421-02