Module Interface Card Getting Started Guide
Cisco Systems, Inc
Cisco Connected Grid Ethernet Switch
Text Part Number OL-23421-02
No combinations are authorized or intended under this document
2012-2014 Cisco Systems, Inc. All rights reserved
Pre-Installation
Obtaining Documentation and Submitting a Service Request
Installation
Switch Models
Managing the Switch Module
Cisco Configuration Professional
Resetting the Switch Module
SFP Module Connectors
Document Conventions
Preface
Purpose
Related Publications
Obtaining Documentation and Submitting a Service Request
Product Overview
Switch Models
Switch Models, page Ports, page LEDs, page
C H A P T E R
Port Locations, page Port Labeling, page 10/100BASE-T Ports, page
Ports
Port Locations
PoE and PoE+ Ports, page 10/100 Mb/s SFP Module Slots, page
Label
Port Labeling
Port
GRWIC-D-ES-2S-8PC Port Labeling
10/100BASE-T Ports
PoE and PoE+ Ports
Dual-Purpose Gigabit Ethernet Ports
10/100 Mb/s SFP Module Slots
100/1000 Mb/s SFP Module Slots
Model
Supported SFPs
Type of SFP Module
LEDs
Description
GRWIC-D-ES-2S-8PC Switch Module Copper Model LEDs
Description
Router Compact Flash Memory Cards
flash or
1-10
flash1
flash0
Installation Warning Statements
Installation
Pre-Installation
Pre-Installation Installation Connecting to the Network
Installation
Figure 2-1 Removing the Slot Divider From the CGR 2010 Router
Figure 2-2 Positioning the Switch Module to Install in the Router
Chapter 2 Installation Installation
OL-23421-02
Step 5 Tighten the screws
Connecting the Copper Switch Module, page
Connecting to the Network
Connecting the Copper Switch Module
Connecting the Fiber Switch Module, page
Connecting the Fiber Switch Module
Figure 2-5 Connecting the Copper Model to the Network
Removing the Switch Module
Chapter 2 Installation Removing the Switch Module
OL-23421-02
System Requirements Express Setup Troubleshooting Express Setup
Express Setup
Express Setup
Resetting the Switch Module
Step 2 Verify that no device is connected to the switch module
Step 6 Select one of the following
Step 3 Enter the Network Settings values
Problem
Troubleshooting Express Setup
Resetting the Switch Module
Resolution
OL-23421-02
Step 3 Follow the steps in Express Setup, page
Chapter 3 Express Setup Resetting the Switch Module
Cisco Configuration Professional
Managing the Switch Module
Using the Device Manager
Using the Device Manager Cisco Configuration Professional
Interface
Accessing the Switch Module
Other Management Options
IP Address
Disconnecting from the Switch Module
10/100BASE-T Ports, page SFP Module Slots, page
Connecting Devices to the Switch Module
Dual-Purpose Port with RJ-45 and SFP Connectors, page
Dual-Purpose Port with RJ-45 and SFP Connectors, page
SFP Module Slots
237940
Figure 4-3 Connecting the Cable into the SFP Port
237941
237942
Chapter 4 Managing the Switch Module
Dual-Purpose Port with RJ-45 and SFP Connectors
237964
Figure 4-4 Ethernet Cable Connected to the RJ-45 Connector
237965
Verifying Port Connectivity
Figure 4-5 Dual-Purpose Connectors
Connecting Devices to the Switch Module
4-10
Chapter 4 Managing the Switch Module
OL-23421-02
SFP Module Connectors
Cable and Connectors
Connector Specifications
Connector Specifications, page A-1 Cables and Adapters, page A-2
SFP Module Cables
Cables and Adapters
Dual-Purpose Ports
SFP Module Cables, page A-2 Cable Pinouts, page A-4
Size/Cladding
Cable Pinouts
Figure A-7
Four Twisted-Pair Crossover Cable Schematics for 1000BASE-T Ports
Figure A-6
Figure A-8 Identifying a Crossover Cable
Appendix A Cable and Connectors Cables and Adapters
OL-23421-02