Chapter 4 Uninstalling the EM
Removing the EM Package
Removing the EM Package
You can uninstall the EMs using the provided scripts. Use one of the following options listed here to remove the software:
•Removing Packages Using the cemf install Script, page 4-3
•Removing EM Packages Using the Install Script, page 4-4
You need not uninstall the EM to install a later version. For additional information, see the “Installing the EM” section on page
To prepare to remove an EM, log in as a root user on the machine where the EM is installed.
Tip The EM can be uninstalled whether Cisco EMF is initialized (i.e., running) or not. You can choose to determine if Cisco EMF is initialized prior to beginning the uninstall process. For additional information, see the “Checking the Status of the EM” section on page
Removing Packages Using the cemf install Script
You can use the cemf install script to list all the EM packages installed and remove selected packages. The cemf install script removes the shared components and the EM package (e.g.,
Cisco Access Router Manager and all required components).
Note It is recommended that you remove packages using the cemf install script only if
Cisco Access Router Manager Series Manager is the only EM you currently have installed.
Some options cannot be removed. For example, Cisco EMF cannot be removed until the EM is removed. Dependent software (for example, Cisco Access Router Manager) must be removed before the primary software (in this case, Cisco EMF) can be removed.
Note To remove packages using the cemf install script, see the Cisco Element Management Framework Installation and Administration guide at the following URL: http://www.cisco.com/en/US/partner/products/sw/netmgtsw/ps829/products_installation_and_configur ation_guide_book09186a00800ffd0d.html
Cisco Access Router Manager Installation Guide
|
| ||
|
|
