Chapter 4 Authentication and Accounting

RADIUS Accounting Records

Example 4-6shows the information contained in an accounting-stop record for service termination.

Example 4-6 RADIUS Accounting-Stop Record for Service Termination

NAS-IP-Address = 192.168.2.48

NAS-Port = 0

NAS-Port-Type = Virtual

User-Name = "zeus"

Acct-Status-Type = Stop

Service-Type = Framed-User

Acct-Session-Id = "00000002"

Acct-Terminate-Cause = User-Request

Acct-Session-Time = 84

Acct-Input-Octets = 0

Acct-Output-Octets = 649

Acct-Input-Packets = 0

Acct-Output-Packets = 17

Framed-Protocol = PPP

Framed-IP-Address = 201.168.101.10

Control-Info = "I0;0"

Control-Info = "O0;649"

Service-Info = "Ninternet"

Service-Info = "Uzeus"

Service-Info = "TP"

Acct-Delay-Time = 0

The following describes some of the attributes included in the record. For more information, refer to the Service Section Gateway, Release 12.2(15)B feature module.

Acct-Status-Type—Indicates that the accounting-request marks the end of the user service.

Service-Type—Indicates the type of service.

Acct-Session-Time—Indicates how long the user has been receiving service and is expressed in seconds.

Acct-Terminate-Cause—Indicates the reason for service termination, which can be due to the following events:

User-Request

Lost-Carrier

Lost-Service

Session-Timeout

Idle-Timeout

Cisco 10000 Series Router Service Selection Gateway Configuration Guide

4-4

OL-4387-02

 

 

Page 34
Image 34
Cisco Systems OL-4387-02 manual Authentication and Accounting Radius Accounting Records