Cisco Systems OL-8550-09 - page 1043

38-97
Catalyst 3750 SwitchSoftware Configuration Guide
OL-8550-09
Chapter38 Configuring IP Unicast Routing
Configuring Protocol-Independent Features
To delete an entry, use the no route-map map tag global configuration command or the no match or no
set route-map configuration commands.
You can distribute routes from one routing domain into another and control route distribution.
Beginning in privileged EXEC mode, follow these steps to control route redistribution. Note that the
keywords are the same as defined in the previous procedure.
Step18 set metric bandwidth delay reliability loading mtu Set the metric value to give the redistributed routes (for
EIGRP only):
•bandwidth—Metric value or IGRP bandwidth of the
route in kilobits per second in the range 0 to
4294967295
•delay—Route delay in tens of microseconds in the
range 0 to 4294967295.
•reliability—Likelihood of successful packet
transmission expressed as a number between 0 and
255, where 255 means 100 percent reliability and 0
means no reliability.
•loading— Effective bandwidth of the route expressed
as a number from 0 to 255 (255 is 100 percent
loading).
•mtu—Minimum maximum transmission unit (MTU)
size of the route in bytes in the range 0 to
4294967295.
Step19 set metric-type {type-1 | type-2} Set the OSPF external metric type for redistributed routes.
Step20 set metric-type internal Set the multi-exit discriminator (MED) value on prefixes
advertised to external BGP neighbor to match the IGP
metric of the next hop.
Step21 set weight Set the BGP weight for the routing table. The value can
be from 1 to 65535.
Step22 end Return to privileged EXEC mode.
Step23 show route-map Display all route maps configured or only the one
specified to verify configuration.
Step24 copy running-config startup-config (Optional) Save your entries in the configuration file.
Command Purpose
Command Purpose
Step1 configure terminal Enter global configuration mode.
Step2 router {bgp | rip | ospf | eigrp} Enter router configuration mode.
Step3 redistribute protocol [process-id] {level-1 | level-1-2 |
level-2} [metric metric-value] [metric-type type-value]
[match internal | external type-value] [tag tag-value]
[route-map map-tag] [weight weight] [subnets]
Redistribute routes from one routing protocol to
another routing protocol. If no route-maps are
specified, all routes are redistributed. If the keyword
route-map is specified with no map-tag, no routes are
distributed.