Chapter 9 Removal and Replacement Procedures

Preventing Electrostatic Discharge Damage

Warning Because invisible laser radiation may be emitted from the aperture of the port when no cable is connected, avoid exposure to laser radiation and do not stare into open apertures.

Warning This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the absence of a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician if you are uncertain that suitable grounding is available.

Warning Hazardous voltage or energy is present on the backplane when the system is operating. Use caution when servicing.

Preventing Electrostatic Discharge Damage

Electrostatic discharge (ESD) damage, which can occur when electronic cards or components are improperly handled, results in complete or intermittent failures. Port adapters and processing modules consist of printed circuit boards that are fixed in metal carriers. Electromagnetic interference (EMI) shielding and connectors are integral components of the carrier. Although the metal carrier helps to protect the board from ESD, use a preventive antistatic strap during handling.

Following are guidelines for preventing ESD damage:

•Always use an ESD wrist or ankle strap and ensure that it makes good skin contact.

•Connect the equipment end of the strap to an unfinished chassis surface.

•When installing a component, use any available ejector levers or captive installation screws to properly seat the bus connectors in the backplane or midplane. These devices prevent accidental removal, provide proper grounding for the system, and help to ensure that bus connectors are properly seated.

•When removing a component, use any available ejector levers or captive installation screws to release the bus connectors from the backplane or midplane.

•Handle carriers by available handles or edges only; avoid touching the printed circuit boards or connectors.

•Place a removed component board-side-up on an antistatic surface or in a static shielding container. If you plan to return the component to the factory, immediately place it in a static shielding container.

•Avoid contact between the printed circuit boards and clothing. The wrist strap only protects components from ESD voltages on the body; ESD voltages on clothing can still cause damage.

•Never attempt to remove the printed circuit board from the metal carrier.

Caution For safety, periodically check the resistance value of the antistatic strap. The measurement should be between 1 and 10 megohm (Mohm).

Cisco SCE8000 Installation and Configuration Guide, Rel 3.1.7

9-2

OL-16478-02

 

 

Page 123 Page 125
Page 124
Image 124
Cisco Systems SCE8000 manual Preventing Electrostatic Discharge Damage
Page 123 Page 125

SCE8000 specifications

Cisco Systems SCE8000 is an advanced service control edge solution designed to enhance the management and performance of service provider networks. Targeted at carriers and large enterprises, the SCE8000 is characterized by its capacity to efficiently handle traffic management, quality of service (QoS), and policy enforcement across various services including voice, video, and data.

One of the main features of the SCE8000 is its scalability. The platform supports a high-density architecture, allowing service providers to seamlessly expand their networks to accommodate growing traffic demands. This scalability is complemented by an impressive throughput, which enables the handling of millions of concurrent sessions, making it ideal for environments with significant user activity.

The SCE8000 employs advanced traffic management capabilities, leveraging deep packet inspection (DPI) technology. This allows for granular visibility into network traffic, enabling service providers to make informed decisions about resource allocation and policy application. Additionally, the device supports multiple protocol analysis, ensuring compatibility across various network services and enhancing overall efficiency.

Quality of Service (QoS) is another critical characteristic of the SCE8000. The platform provides sophisticated mechanisms to prioritize traffic, thereby ensuring that delay-sensitive applications such as VoIP and video streaming receive the necessary bandwidth. This capability is enhanced by Cisco's intelligent traffic shaping and congestion management features, which work together to optimize the user experience even in congested network conditions.

The SCE8000 also integrates robust security features, including session initiation protocol (SIP) security, to protect against malicious attacks and maintain service integrity. This is particularly important in today's cyber landscape where service providers must safeguard their infrastructure from various threats.

Automation and programmability are essential characteristics of the SCE8000, enabling operators to implement policies quickly and efficiently. This feature allows for dynamic scaling and rapid deployment of new services, significantly reducing the time to market for new offerings.

In conclusion, Cisco Systems SCE8000 stands out as a powerful platform for managing service provider networks. With its high scalability, advanced traffic management, quality of service assurance, robust security features, and automation capabilities, the SCE8000 enables service providers to deliver a superior customer experience while optimizing their operational efficiency. This makes it an invaluable asset for any organization looking to enhance its network performance and service delivery.
Top Page Image Contents