D-1
CiscouBR924 Software Configuration Guide
OL-0337-05 (8/2002)
APPENDIX
D

New and Changed Commands Reference

All cable-specific commands for the CiscouBR924 cable access router in CiscoIOS Release 12.2(8)
and later releases are described in the Cable CPE Commands chapter in the Cisco Broadband Cable
Command Reference Guide, available on Cisco.com and the Customer Documentation CD-ROM. This
chapter is regularly updated to include all command changes and additions.
Note To locate the documentation for the “related commands” mentioned in this chapter, use the CiscoIOS
Release 12.2 command reference master index that is available on Cisco.com and the Documentation
CD-ROM.

Commands Reserved for DOCSIS Use

In Cisco IOS Release 12.1(2)T and later releases, the following comma nds were removed from the CLI:
•[no] cable-modem downstream saved channel
•[no] cable-modem fast-search
•[no] cable-modem downstream symbol rate
•[no] cable-modem transmit-power
•[no] cable-modem upstream preamble qpsk
In Cisco IOS Release 12.1(2)T and later software releases, these commands are now reserved exclusively
for DOCSIS use. These commands can appear in the router’s Cisco IOS configurat ion file, but they
cannot be given through the router’s CLI.