•Cisco 7000 series routers with the 7000 Series Route Switch Processor (RSP7000) and 7000 Series Chassis Interface (RSP7000CI); the RSP7000 should have at least 64 MB of DRAM
•Two single-width port adapters, or one dual-width port adapter, supporting multiple LAN and WAN port adapter types, including Ethernet, Fast Ethernet, Gigabit Ethernet, serial, channelized serial, multichannel, HSSI, ATM, and POS
Note The VIP6-80 requires at least one port adapter installed in order to be supported. A single-width port adapter must have a blank port adapter installed in the empty port adapter slot location.
Microcode Requirements
Upgradable microcode on each interface processor contains board-specific software instructions.These microcode images come bundled with Cisco IOS software, and the images load automatically when a new software image is installed. (New microcode provides additional features and enhancements to interface processors.) Each Cisco IOS release works to optimize the bundled microcode images.
Tools and Parts Required
You need the following tools and parts to install or upgrade a VIP6-80:
•VIP6-80 (For specific compatibility requirements, see the “Software Requirements” section on page 10.)
•Number 1 Phillips and a 3/16-inch flat-blade screwdriver
•ESD-prevention equipment or disposable grounding wrist strap, included with all Cisco products
Note The VIP6-80 requires at least one port adapter installed in order to be supported. A single-width port adapter must have a blank port adapter installed in the empty port adapter slot location.
If you need additional equipment, contact a service representative for ordering information.
Agency Approvals
The VIP6-80 complies with the 89/366/EEc and 73/23/EEC directives, which can be found in the Regulatory Compliance and Safety Information for the Cisco 7500 Series Routers guide online at http://www.cisco.com/univercd/cc/td/doc/product/core/cis7505/4194pc75.htm.
Safety Guidelines
Following are safety guidelines that you should apply when working with any equipment that connects to electrical power or telephone wiring.
Versatile Interface Processor (VIP6-80) Installation and Configuration Guide
