Cisco Systems (VIP6-80) Installation Prerequisites, Traffic Management, Software Requirements

Traffic Management

The VIP6-80 supports the following:

•Simple Network Management Protocol (SNMP) agent V1 (RFCs 1155–1157)

•Management Information Base (MIB) II (RFC 1213)

Installation Prerequisites

This section provides installation prerequisites to ensure a successful VIP6-80 installation, and includes the following sections:

•Software Requirements, page 10

•Hardware Requirements, page 10

•Microcode Requirements, page 11

•Tools and Parts Required, page 11

•Agency Approvals, page 11

•Safety Guidelines, page 11

Software Requirements

The minimum Cisco IOS Release requirements for VIP6-80 are listed in Table 6. For configuration information and support, refer to the modular configuration and modular command reference publications in the Cisco IOS software configuration documentation set that corresponds to the software release installed on your Cisco hardware.

	Note	You can access Cisco IOS software configuration and hardware installation and maintenance
		documentation on the World Wide Web at http://www.cisco.com. Translated documentation is available
		at the following URL: http://www.cisco.com/public/countries_languages.shtml.
Table 6	VIP6-80 Minimum Software Release Requirements
VIP Release			Minimum Cisco IOS Supported Releases
VIP6-80			Cisco IOS Release 12.0(22)S or later release of Cisco IOS Release 12.0 S
			Cisco IOS Release 12.1(12)E or later release of Cisco IOS Release 12.1 E
			Cisco IOS Release 12.2(12)T or later release of Cisco IOS Release 12.2 T

Hardware Requirements

The VIP6-80 is a single motherboard. It operates with the following:

•Cisco 7505, Cisco 7507, Cisco 7507-MX, Cisco 7513, Cisco 7513-MX, and the Cisco 7576 routers with the Route Switch Processor (RSP1, RSP2, RSP4, RSP4+, RSP8, or RSP16); the RSP should have at least 64 MB of DRAM

Versatile Interface Processor (VIP6-80) Installation and Configuration Guide

10 OL-5078-01