Cisco Systems WSC4500X16SFP Overview of Loop Guard

14-3
Software Configuration Guide—Release 12.2(25)SG
OL-7659-03
Chapter14 Configuring STP Features
Overview of Loop Guard
VLAN1002 FastEthernet3/2 Port Type Inconsistent
VLAN1003 FastEthernet3/1 Port Type Inconsistent
VLAN1003 FastEthernet3/2 Port Type Inconsistent
VLAN1004 FastEthernet3/1 Port Type Inconsistent
VLAN1004 FastEthernet3/2 Port Type Inconsistent
VLAN1005 FastEthernet3/1 Port Type Inconsistent
VLAN1005 FastEthernet3/2 Port Type Inconsistent
Number of inconsistent ports (segments) in the system :10
Overview of Loop Guard
Loop guard helps prevent bridging loops that could occur because of a unidirectional link failure on a
point-to-point link. When enabled globally, loop guard applies to all point-to-point ports on the system.
Loop guard detects root ports and blocked ports and ensures that they keep receiving BPDUs from the ir
designated port on the segment. If a loop-guard-enabled root or blocked port stop r eceiving BPDUs from
its designated port, it transitions to the blocking state, assuming there is a physical link error on this port.
The port recovers from this state as soon as it receives a BPDU.
You can enable loop guard on a per-port basis. When you enable loop guard, it is automatically applied
to all of the active instances or VLANs to which that port belongs. When you disable loop guard, it is
disabled for the specified ports. Disabling loop guard moves all loop-inconsistent port s to the listening
state.
If you enable loop guard on a channel and the first link be comes unidirectional, loop guard blocks the
entire channel until the affected port is removed from the channel. Figure14-1 s hows loop guard in a
triangular switch configuration.
Figure14-1 Triangular Switch Configuration with Loop Guard
Figure 14-1 illustrates the following configuration:
•Switches A and B are distribution switches.
•Switch C is an access switch.
•Loop guard is enabled on ports 3/1 and 3/2 on Switches A, B, and C.
Enabling loop guard on a root switch has no effect but provides protection when a root switch becomes
a nonroot switch.
3/1 3/1
3/2
3/1 3/2
3/2
AB
C
Designated port
Root port
Alternate port
55772