Citizen D710/D716 Calling Up No-Decompression Limit Time, Dive Alarm, Displayed Depth

Depth

No-decompression limit time

6. Calling Up No-Decompression Limit Time

(1)The no-decompression limit time corresponding to a depth of 12 m (40 ft) is displayed when the upper right button (B) is pressed once during the dive plan display.

(2)No-decompression limit times are called up in order for every 3 m (10 ft) of depth each time the upper right button (B) is pressed once. Repeatedly press the upper right button (B) until the

depth corresponding to the depth of the next scheduled dive is displayed.

*No-decompression limit time changes according to the diving depth of the previous dive, dive time and surface interval time.

Displayed Depth

This watch displays no-decompression limit time for the following 12 depths. 12m, 15m, 18m, 21m, 24m, 27m, 30m, 33m, 36m, 39m, 42m, 45m

(40 ft, 50 ft, 60 ft, 70 ft, 80 ft, 90 ft, 100 ft, 110 ft, 120 ft, 130 ft, 140 ft, 150 ft)

WARNING

Please dive while allowing ample margin with respect to the displayed no- decompression limit time to ensure safety.

7. Dive Alarm

<Depth Alarm>

The depth display flashes and an alarm sounds for 15 seconds at 1 minute intervals (for the set number of times) to warn the diver when the diver remains at a depth deeper than the set depth while diving. The alarm stops sounding when the diver ascends to a depth less than the set depth, and sounds again if the diver descends deeper than the set depth.

•Setting range: 10 m (33 ft) to 39 m (130 ft) (1 m (4 ft) units), OFF

•No. of times alarm sounds: 1 to 5 times, ON (no limit)

<Dive Time Alarm>

The dive time display flashes and an alarm sounds for 15 seconds when the set time elapses from the start of the dive. This alarm sounds only once.

• Setting range: 5 min to 90 min (5 min intervals), OFF

58