![](/images/new-backgrounds/1144707/14470769x1.webp)
3. Using the Destination Timer Mode
The destination timer measures and displays the amount of time remaining until arriving at a destination up to a maximum of 99 hours, 59 minutes and 59 seconds after having set the destination and arrival time when traveling or on business overseas. Once the arrival time is reached, an alarm informing you of arrival sounds for about 30 seconds and "Dest" is displayed on the display. After arrival, elapsed time from the time of arrival is measured for up to 99 hours, 59 minutes and 59 seconds.
In addition, the alarm informing you of arrival at your destination can be selected from 15 types of alarm sounds.
| [Arrival Time | [Remaining Time Display] | |
Destination | Display] |
|
|
|
|
| |
(C) | (B) | (C) | (B) |
|
|
| Remaining time |
|
|
| Current time in |
|
|
| time mode |
(D) | (A) | (D) | (A) |
| Arrival time |
|
|
A. Setting the Destination Timer |
| ||
(1) The watch switches to the correction state (display flashes) | Flashing | ||
when the upper left button (C) is pressed for at least 2 seconds |
| ||
and then released in the destination timer mode. |
|
(2)The flashing item changes in the order shown below each time the upper left button (C) is pressed once.
•Pressing the upper left button (C) and then releasing in the alarm number correction state returns the watch to the normal display.
Location
(C)
Daylight savings
time switching
(C)
Year
(C)
Month
(C)
Alarm
number
(C)
Minutes
(C)
Hours
(C)
Date
(3)The flashing item can be corrected by pressing either the upper right button (B) or lower right button (A).
•Pressing the upper right button (B) advances the display by one step at a time each time it is pressed, while pressing the lower right button (A) moves the display back by one step at a time each time it is pressed. (Pressing either button continuously causes the display to change rapidly.)
•Refer to the section on "Locations Displayed by this Watch" for information on displayed locations.
•When switching daylight savings time (ON or OFF is flashing), the display switches back and forth between the settings each time the lower right button (A) or upper right button (B) is pressed once.
35