Citizen D710/D716 instruction manual Display during Nitrox Setting

B. Display during NITROX Setting

During Skin Diving

	Current time
Dive time		(A)
Current
depth		(A)
Current water temperature	Body partial pressure
	of oxygen (PO2)

Maximum depth

Body nitrogen level graph

Set oxygen concentration (O2%)

•Maximum depth, set oxygen concentration (O2%) and the body nitrogen level graph are called up for about 10 seconds when the lower right button (A) is pressed once.

					When 3 minutes or more elapse continuously at
					a water depth of 1 m (4 ft) or more
During Scuba Diving
	<During No-Decompression Diving>			No-decompression limit time (NDL)
	Dive time			(A)			Current time
	Current						Body
	depth			(A)
							nitrogen
							level graph
	Current water temperature	Body partial pressure				Set oxygen
		of oxygen (PO2)				concentration (O2%)
	When no-decompression limit time is					When decompression stop instructions
	exceeded					are followed
	<During Decompression Diving>
			Total ascent time
				(A)			Current time
							Maximum
							depth
				(A)
							Current
	Decompression stop					Set oxygen	water
							temperature
	instructions (depth, time)					concentration (O2%)

•If diving is continued beyond the no-decompression limit time, an alarm sounds and decompression stop instructions (STOP) are displayed on the display indicating that decompression diving has occurred.

•Pressing the lower right button (A) once during scuba diving calls up the current time, maximum depth, set oxygen concentration, water temperature and body nitrogen level graph (the body nitrogen level graph is not displayed during decompression diving).

65