Clarity - INT9 A/D converter | Troubleshooting |
4 Troubleshooting
If you will not find your answers here, use the www.dataapex.com website where the Support menu will navigate you to frequently asked questions (FAQ), Clarity email conference archive or contact to DataApex helpdesk.
4.1Locate your problem:
When troubles occur, the fastest way to find a solution for it is to search for it in the following index via the Dialog (window), in which the problem occured, Error Messages that apear or according to utilized Hardware. The name of the window/dialog is visible in its header.
Names of individual Clarity Instruments appear in the header instead of the common term “Instrument”.
Dialog |
|
| |
- | Clarity |
| 30 |
- | Data Acquisition |
| 30 |
- | Instrument |
| 29 |
- | Method Setup |
| 29 |
- | Sequence |
| 29 |
- | Single Analysis |
| 29 |
- | System Configuration | 21, 29, 30 | |
Error Messages |
|
| |
- | Board malfunction |
| 21 |
- | Cannot create detector | 21 | |
- | Cannot find driver file ... | 21 | |
- | Cannot find first board | 21 | |
- | Cannot find second board | 21 | |
- | Disabled (in the status line) | 29 | |
- | Error Occurred During Setup | 21 | |
- | Simulated (in Data Acquisition) | 30 | |
| Note: | To find solutions for error messages not listed above, | |
|
| check the Clarity Getting Started Guide or visit our | |
|
| web pages (www.dataapex.com). |
|
20
