![](/images/new-backgrounds/1326600/32660029x1.webp)
Clarity - INT9 A/D converter | Using the INT9 card |
Channel 1 (to 4)
For each channel of the INT9 A/D Converter the name of the signal can be edited in the
Name field and the Set Units... button can be used to change other signal parametres. Effects of these changes can be seen in other fields of the respective Channel 1 (to 4) section.
Name
This field will be used to describe the signal in the Chromatogram window.
Inversion of Signal
Inverts the polarity of the signal from the detector. This function can also be used for easy correction of inversely connected wires.
Bipolar
Both positive and negative voltages will be measured. Unchecking the Bipolar option will improve the resolution of the signal by 1 bit. On the other hand, it will also restrict the measuring of negative signals (i.e. below zero).
Set Units...
Invokes the Detector Units dialog.
Fig. 9. Detector Units
•Quantity – Field for entering the quantity of the units.
•Units – Field for entering the unit symbol, along with the prefix.
•Coefficient – Allows to enter the coefficient between the selected units and mV (default).
•Autoprefix – Allows to enter the unit prefix. In graphs, units will be scaled automatically, while in the tables, units with the prefix entered will be used.
15