Clarity INT9 manual Method Setup, Supply Frequency

Clarity - INT9 A/D converter Using the INT9 card

Supply Frequency

Allows to change the Mains Supply Frequency Suppression. It is used for suppresing the interference on the specified frequency level. This setting influences the sampling frequency as well.

Note: In most parts of Americas, the 60 Hz Mains frequency is usual, while the rest of the world tends to use 50 Hz Mains frequency (pre-set as default). The 50 Hz frequency is common in countries using 230V power supply, while the 60 Hz is connected to the 117V power supply.

3.2Method Setup

The Method Setup – Acquisition and Method Setup – Measurement dialogs are where the parameters that depend on the type of analysis (measuring conditions) are set and so it is expected that they will be specific for various types of analysis. This is the reason for them to be a part of the method.

Caution! Parameters cannot be changed during analysis.

3.2.1Method Setup - Acquisition

Fig. 10. Method Setup - Acquisition (INT9)

16