Main Power On/Off Switch | Classe Audio SSP-800 instruction

Danger!

21Main Power On/Off Switch

This switch connects and disconnects the SSP-800 from AC.

NOTE: Changes to settings are stored whenever the SSP-800 is put into Standby. Turning oﬀ power to the unit before ﬁrst entering Standby mode erases any setting changes that have been made since the unit was last placed in Standby mode.

22AC Power Cord Input

The detachable three-conductor AC power cord and the socket into which it connects conform to rigorous standards developed by the IEC (International Electrotechnical Commission).

Your SSP-800 contains potentially dangerous voltages and current capabilities. Do not attempt to open it! There are no user-serviceable parts inside. All service must be referred to a qualified authorized Classé dealer or distributor.

21

Image 21

Classe Audio SSP-800 owner manual Main Power On/Off Switch, AC Power Cord Input

Contents

SSP-800 Surround Sound Processor Page Important Safety Instructions Contents Configuration Use Video Next input Welcome to the Classé family Introduction Exceptional Design Features Page Unpacking your SSP-800 Unpacking and Placement Placement considerations Warm-up/break-in period Operating voltage Voltage protection Standby/On Switch Menu On/Off SwitchFront Panel Touchscreen Volume Control KnobAudio Mute Control IR window Video Inputs Rear Panel Composite Video Inputs Component Video InputsHdmi Inputs Component Video Output Hdmi OutputsDigital Audio Inputs Coaxial Digital Audio Inputs Optical Digital Audio Output Optical Digital Audio Output Coaxial11 7.1-Channel Analog Audio Inputs 12 2-Channel Balanced Analog Audio Inputs IR Output IR InputTrigger Outputs USB Port 18 RS-232 Port 20 10-Channel Analog Outputs CAN-Bus Input and Output AC Power Cord Input Main Power On/Off Switch Basic Functions Remote ControlAudio Processing Functions Input Sel Selection Button Volume Control & Mute Buttons Preset Config Configuration ButtonNavigation & Menu Buttons Function Keys F1 to F4 Initial Setup StepChoose the appropriate cables Connect all source components to the SSP-800 rear panel Terminals to black terminals Power up the system Understanding Surround Sound Name DTS-HD Post-processing Source selection Using the SSP-800 Name Description Mode selection Data in the soundtrack System trims Controls Configuration select Menu System Volume setup System setup Max volume Startup volume IR setup Automation Mute setup Name Input setup Audio Configuration Triggers Use Video Next input Profiles Room EQ Configuration Name Distances Use Speakers Levels Speakers available Auxiliary channels Teach IR Black level Brightness Timeout Display setup Language OSD on screen display Colors Volume Dolby Pro Logic DTS Neo6 Dolby/DTS Important note on Fkey use Remote Fkeys Version info Sensors Features Classé Delta Series Products Hardware setupCategory 5 Network Cables CAN-Bus Terminator SSP-300 & 600 CAN-Bus Interface Box Using CAN-Bus Configuration Operate AC status Status CAN-Bus shared features PlayLink Amp info Event log Troubleshooting Everything appears to be powered on, but there is no soundThere is no sound and the Standby LED is not lit Only one speaker seems to be playing IR remote control does not seem to functionThere is a hum coming out of the speakers There is a hum coming from the SSP-800 Voltage Protection Circuit Input factory defaults Care & Maintenance Overall dimensions SpecificationsNet weight Shipping weight Dimensions Installation Worksheet Page North America 1 800 370 3740 email classe@bwgroupusa.com