Menu System | Classe Audio SSP-800 instruction

36

The Menu System

The comprehensive menu system provides setup and conﬁguration controls for the SSP-800 Surround Sound Processor. These installation-speciﬁc features let you customize how the SSP-800 works within the context of your particular system.

Pressing the Menu button on the front panel opens the main Menu page, which is divided into six sections as shown below. The menu screens are always shown on the front panel touchscreen and can also be viewed as an OSD (On Screen Display) on the main video display.

The button on the top right of the menu pages provides a “More” button, when additional menu options are available, or a Home button for returning to the Home page. Pressing the Menu button again either returns to the Home page, or returns to the Main Menu page, depending upon your location in the Menu system.

Image 36

Classe Audio SSP-800 owner manual Menu System

Contents

SSP-800 Surround Sound Processor Page Important Safety Instructions Contents Configuration Use Video Next input Introduction Welcome to the Classé family Exceptional Design Features Page Unpacking and Placement Unpacking your SSP-800 Placement considerations Warm-up/break-in period Operating voltage Voltage protection Standby/On Switch Menu On/Off SwitchFront Panel Volume Control Knob TouchscreenAudio Mute Control IR window Rear Panel Video Inputs Composite Video Inputs Component Video InputsHdmi Inputs Hdmi Outputs Component Video OutputDigital Audio Inputs Coaxial Digital Audio Inputs Optical Digital Audio Output Coaxial Digital Audio Output Optical11 7.1-Channel Analog Audio Inputs 12 2-Channel Balanced Analog Audio Inputs IR Input IR OutputTrigger Outputs USB Port 18 RS-232 Port CAN-Bus Input and Output 20 10-Channel Analog Outputs Main Power On/Off Switch AC Power Cord Input Remote Control Basic FunctionsAudio Processing Functions Input Sel Selection Button Preset Config Configuration Button Volume Control & Mute ButtonsNavigation & Menu Buttons Function Keys F1 to F4 Initial Setup StepChoose the appropriate cables Connect all source components to the SSP-800 rear panel Terminals to black terminals Power up the system Understanding Surround Sound Name Post-processing DTS-HD Using the SSP-800 Source selection Mode selection Name Description Data in the soundtrack Controls System trims Configuration select Menu System System setup Volume setup Max volume Startup volume IR setup Automation Mute setup Input setup Name Audio Configuration Use Video Next input Triggers Profiles Room EQ Configuration Name Distances Levels Use Speakers Speakers available Auxiliary channels Black level Teach IR Display setup Brightness Timeout Language OSD on screen display Colors Volume Dolby/DTS Dolby Pro Logic DTS Neo6 Remote Fkeys Important note on Fkey use Features Version info Sensors Hardware setup Classé Delta Series ProductsCategory 5 Network Cables CAN-Bus Terminator SSP-300 & 600 CAN-Bus Interface Box Using CAN-Bus CAN-Bus shared features Configuration Operate AC status Status PlayLink Amp info Event log Troubleshooting Everything appears to be powered on, but there is no soundThere is no sound and the Standby LED is not lit IR remote control does not seem to function Only one speaker seems to be playingThere is a hum coming out of the speakers There is a hum coming from the SSP-800 Voltage Protection Circuit Care & Maintenance Input factory defaults Specifications Overall dimensionsNet weight Shipping weight Dimensions Installation Worksheet Page North America 1 800 370 3740 email classe@bwgroupusa.com