input setup

name

40

Each of the 20 inputs supported by your SSP-800 Surround Sound Processor can be customized in several ways to enhance system performance or to simplify controls. The Input Setup menu always opens to the setup page for Input 1. The menu contains six buttons that completely define each input – Name, Audio, Configuration, In use, Video, and Next input, as shown below. The same menu is used to set up each input:

The Name button provides a way to customize the names of the inputs as displayed on the input selection screens. For example, if you have the Classé DVD transport connected to Input 6, you may want to rename the input to “CDT-300” to make it easier to remember. Each name can be up to 14 characters long.

To change an input name to something more specific to your system, use the four buttons along the bottom of the Input Name menu, shown in the Input Setup diagram above. The buttons provide the following functions:

The left arrow button acts like the backspace key on a computer keyboard. Touch this button to delete characters by moving the cursor to the left.

The right arrow button adds characters by moving the cursor to the right.

The + and buttons allow you to change the current character by scrolling through the available list of characters. This list includes all upper- and lower-case letters of the alphabet, the numbers 0 to 9, and a variety of punctuation.

When you’ve completed modifying the input name, touch the Back button to return to the Input Setup menu.

Page 40
Image 40
Classe Audio SSP-800 owner manual Input setup, Name