ClearSounds A600 manual Desk / Table Mounting, Wall Mounting

REAR OF BASE

Desk / Table Mounting

1.Connect one end of the 6 ft phone cord to the line jack on the back of the base and connect the other end to a modular phone jack.

2.Plug the AC power adapter into the jack on the back of the base, then plug the AC adapter into a standard electrical outlet or surge protector.

NOTE: The adapter is required for the phone to work.

Wall Mounting

1.Install two self-tapping screws (not supplied) at a distance of 60 mm apart from each other on a horizontal line.

2.Insert the wall mounting bracket to the base as shown in the figure on the right. The raised mounting pins line up with the keyhole slots on the base. Once the holes are lined up, snap the bracket securely into place.

3.Plug the AC power adapter into the jack on the back of the base. NOTE: The adapter is required for the phone to work.

4.Connect one end of the 8-inch phone cord to the line jack on the back of the base and connect the other end to a modular phone jack.

14 – ENGLISH