ClearSounds A600 manual Base Selection, Out of Range Alarm

3.Press up or down to scroll to HS Reset and then press the Select soft key. You will be prompted to enter the PIN.

4.Enter the PIN (the default PIN is 0000) and then press the Reset soft key. If the PIN is validated, the handset settings will be reset to the initial factory settings, otherwise the settings will remain.

5.After resetting, the handset will return to standby mode.

█Base Selection

This function allows you to select a base from those already registered to the handset.

1.Press the Menu soft key to display the main menu list.

2.Press up or down to scroll to HS Settings and then press the Select soft key.

3.Press up or down to scroll to Select Base and then press the Select soft key.

4.Press up or down to select the base you want and then press the Select soft key. If you select a non- existent base, the handset will sound a warning tone.

5.The display will show Selected BS_X_ (Base 1-4). Press the Select soft key to confirm. The display will automatically return to the main screen.

█Out of Range Alarm

This function allows you to know when the handset is out of range of the base, and a beep will sound. Your ClearSounds® A600 comes from the factory preset for Out of Range Alarm ON. To change this setting:

1.Press the Menu soft key to display the main menu list.

2.Press up or down to scroll to HS Settings and then press the Select soft key.

3.Press up or down to scroll to Tone Setup and then press the Select soft key.

31 – ENGLISH