4.Record your announcement after the tone. Recording will stop automatically after 3 minutes or you can confirm and end the recording by pressing the OK soft key. During the recording, the LCD will show “Recording…”.
5.The announcement will be played back immediately. If you do not like your message, record your announcement again or restore it to the default one.
Record Announce2:
The default announcement is “Hello, your call cannot be taken at the moment. Please call back later.”. To change the Announcement:
1.Press the TAM soft key to display the TAM main menu list.
2.Press the Select soft key to select Announce and then press down
to select Announce2 and then press the Select soft key.
3.Press down
to scroll to Record and then press the Select soft key.
4.Record your announcement after the tone. Recording will stop automatically after 3 minutes or you can confirm and end the recording by pressing the OK soft key. During the recording, the LCD will show “Recording…”.
5.The announcement will be played back immediately. If you do not like your message, record your announcement again or restore it to the default one.
Using the Base to Record Announcement(s)
Press and hold 
or 
on the base until the system directs you to record. Record your announcement after the tone. Recording will stop automatically after 3 minutes or you can
confirm and end the recording by pressing 
.
The announcement will be played back immediately. If you do not like your message, record your announcement again or restore it to the default one.
