TIP: Make sure the volume on the phone is set loud enough to hear your incoming callers.
Play Messages
When a call is received and the TAM is ON and Announce1 is selected, the machine will play the outgoing announcement, and then perform message recording. The process is as follows:
After ringing N times, the phone enters
Method 1: Using the Handset
1.Press the TAM soft key to display the TAM main menu list.
2.Press down
to select Message and then press the Select soft key.
3.Press the Select soft key again to select New MSG or press down
to select Saved MSG and then press the Select soft key.
4.The phone will announce “You have N new message(s)” or “You have N saved message(s)”. The messages will be played back and you can:
a.press 
to delete the current message while it is playing
b.press 
to pause/play the current message
c.press 
once to replay the current message and twice to replay the previous message
d.press 
to skip to the next message
e.press the Back soft key to stop playing and exit
NOTE: When listening to your messages through the handset, the message will always start playing back through the handset
speakerphone. To switch to the earpiece, press 
. You can switch between speakerphone and handset while listening to
messages by pressing 
.
