ClearSounds A600 manual Dialing Mode Setting, Call Waiting Flash

█Dialing Mode Setting

Your ClearSounds® A600 comes from the factory preset for touch-tone service. Should you need to change this setting based on the type of phone service you have, use Tone for touch-tone service or Pulse for rotary dialing. NOTE: If you are not sure which dialing mode to select, please contact your local phone service provider.

1.Press the Menu soft key to display the main menu list.

2.Press up or down to scroll to BS Settings and then press the Select soft key.

3.Press down to select Dial Mode and then press the Select soft key.

4.Press up or down to select Tone or Pulse and then press the Save soft key.

█Call Waiting (Flash)

Your ClearSounds® A600 comes from the factory preset for Flash Time to Flash-1(600ms). Flash timing is the signalling process that tells the phone system when a phone is on hook or off hook. The United States uses a 600ms timing sequence. The European Union uses a 300ms timing sequence. You can select Flash-1or Flash-2(300ms). To change this setting:

1.Press the Menu soft key to display the main menu list.

2.Press up or down to scroll to BS Settings and then press the Select soft key.

3.Press down to scroll to Flash Time and then press the Select soft key.

4.The display shows the current setting. Press up or down to select Flash-1or Flash-2and then press the Save soft key.

27 – ENGLISH