Remote Access
You can access many features of your answering machine remotely from any touch tone phone. A
1.Dial your phone number from any touch tone phone.
2.When the Announce1/Announce2 message starts to play, you may enter the remote access mode by inputting the Remote code. If you enter the Remote code incorrectly, the machine will ask you to enter code again. You are given 2 more attempts to correctly enter the code before the line is disconnected.
3.After you enter the Remote code, the system will play the menu of commands. You can then follow the commands to operate.
Play the main menu
Play new messages
Play saved messages
Delete all messages
Switch the answering machine on/off
Record Announce1/Announce2
After you press 
or 
to play back messages, you can:
Press 
to replay the current message
Press 
to stop the current message
Press 
to delete the current message
