Clicomm CWP-100 manual Stun

STUN Server	Assign STUN server address and server port when using NAT traversal
(FQDN) for	through “STUN.”	N/A
STUN	Ex) stun.Clipcomm.co.kr:3478
	Assign the NAT router’s external IP address of the network that CWP-
	100 is connected while using NAT Traversal manually when there is no
NAT Router IP	appropriate STUN server.	N/A
for Manual	The user should assign the SIP local port, RTP port, CWP-100 IP
Use	address etc that the CWP-100 uses behind NAT router. Setting up these
	ports is called Port mapping, which enables the CWP-100 to run behind
	the NAT router.
NAT Keep	Assign the packet transmit periodic time so that the CWP-100 maintains
	the connection when it uses NAT traversal. Then the NAT router will be	30s
Alive Interval
	able to keep the CWP-100 IP and port information continuously.

35