Clicomm CWP-100 manual Dynamic IP Dhcp Setting, Adsl Setting, Yes No, Adsl Password, Connect Adsl

④The changed parameter will apply only after the system restarts. Select “5:Restart” from the menu and press ENTER button. Then the system will automatically restart with the new network parameters.

6.2.3. Dynamic IP (DHCP) Setting

①Follow the steps as MENU

“3: System Setting” ”1: Network Setting” “3: DHCP”.

Use DHCP?

Yes No

②Select “Yes” and press ENTER button. Then the system will automatically restart with the DHCP mode.

6.2.4. ADSL Setting

①Follow the steps as MENU

“3: System Setting” ”1: Network Setting” “4: ADSL”.

②You will see the figure as below once you select “4: ADSL”.

1:ADSL ID

2:ADSL Password

3: Connect ADSL

③Select “1: ADSL ID” and input the ADSL ID.

Enter ADSL ID myid_

MODE : A

④In the same way, input the ADSL password.

⑤Select “3: Connect ADSL” and press ENTER button. Then the CWP-100 will automatically attempt the ADSL connection.

⑥In case ADSL connection fails, follow the steps as MENU connection.

“5: System Restart” to reattempt the

13