Clicomm CWP-100 manual VoIP Setting, Server Setting, SIP Server

6.3. VoIP Setting

You need to register with the Internet Telephony Service Provider (ITSP) to utilize various VoIP services. You may set the CWP-100 as your ITSP requests.

To set the system with the LCD and the keypad, follow the steps as MENU “3: System Setting” “2: VoIP Setting”. Then you will enter the submenu and see the display as below.

1:Server Setting

2:Name Setting

3:Codec Setting

4:NAT Traversal

6.3.1. Server Setting

①Follow the steps as MENU

“3: System Setting” “2: VoIP Setting” “1: Server Setting”.

1: SIP Server

2: Register On

3: Registrar Server

4: Registration

5: Outbound Proxy

6: Expiry[sec]

②Select “1: SIP Server” and input the SIP server address.

SIP Server 192.168.0.6

MODE : A

③To register with the Registrar server, press “2: Register On” and select “Yes.”

④In the same way, set the Registrar Server, Outbound Proxy and register Expires parameters. Generally, the Registrar Server and Outbound Proxy are identical with the SIP Server.

The Registrar Server and Outbound Proxy may appear as FQDN1.

The Register Expires is the time for transmitting the Register message periodically so that the CWP-100 keeps registering.

⑤“4: Registration” indicates the current register status.

1FQDN: Fully Qualified Domain Name. (domain name or IP address):(Port number). ex) clipcomm.co.kr:15060

14