Cognitive Solutions A776 manual Select Cover Open Option for B780

Chapter 3: Migrating to a new printer 21

Select Cover Open Option for B780

Set Page Mode Margin Mechanical Adjustment

Code (Hexadecimal)

1F 03 25 16 n

·This command applies to both the A776 and the B780, although it is primarily implemented for B780 printers replacing existing A721 printers to match cashier check printing.

·Default is 0.

·Value is printed on the second diagnostic page.

·Ranges for margin configurations:

Margin Setting	Maximum mechanical adjustment
.5”	30 half dots
.3”	56 half dots
.1”	84 half dots

·Mechanical adjustment does not apply when page size is defined to be greater than the default of 200 full dots wide.

Set Page Mode Option to Trim Full Dots

Code (Hexadecimal)

1F 03 2F n

n < 128 # of full dots trimmed from right side n = 255 compress to fit in 3.024”

. This command applies to both the A776 and the B780, although it is primarily implemented for applications specifying a page size greater than 242 full dots wide.

· Default is no trim.

· Maximum width that can be compressed to fit in 3.024” is 270 full dots. · Value is printed on second diagnostic page.

A776-PG00001 C 12/09 A776 (B780) Programming Guide